Technical Specification


Aquamon Water Level Controller

 

Input Voltage

220V AC/50 Hz

440 V AC/50 Hz

( Other Input Voltages on request )

Motor Protection

Voltage Variation +/- 20%, Dry Run  Condition 60 Sec Delay after return to normal line voltage and power on.

Motor Trip Delay 45 Sec after Dry Run
 

LED Indications

 

  

Sump and lank levels indication on the facia.  Hi/Low/Normal Voltage indication, Flow indication, Pump Motor On/Off /Trip.

 


 Fill

  

Feather touch Push-button to override controls and switches on the Pump motor till the tank fills up.
Auto

 

Pump Motor switched on automatically when level falls below set low.
Manual

 

Auto / Manual Switch for manual operation of pump motor.

Audio Alarm

 

Audio Alarm on Dry Run.

 

 

Mute

 

 Feather touch Push-button to silence the Alarm


Output contact rating

 

One N/O Contact for DOL

Two N/O, N/C Contacts for Starters


Level Sensing Technology 

 

Current loop with Cyclic Sampling. This ensures long sensor life.


Sensors

Standard Conductive type.

Optional Magnetic (PP) Float Switch also available.


Operating conditions Indoor / 55 Deg C.